Tile Block Painting

You Need:

• 1 – 12″ square of plywood (1/2″ thick)
• Liquid Nails™ (available at Home Depot)
• Ceramic tiles
• Sandpaper

You Do:

1. Use the sandpaper to sand the edges of the square so there are no sharp edges or corners.
2. Design how you would like your tiles on the square.
3. Use the Liquid Nails™ to attach the tiles to the square. NOTE: Do this OUTSIDE or with LOTS of ventilation! Liquid Nails™ is very stinky!
4. Allow to dry for 24 hours.
5. Then the children can paint on the tiles and make a print of their painting on a piece of paper!
6. Do not soak the tile block in water! Wash with warm water and a scrub brush but do not try to get it spotless between uses! If tiles fall off use the Liquid Nails to reattach them.